A surface cleaner can easily clean a large area within a short time if you have a large area to clean. To use a surface cleaner, you don’t have to be a professional or take any training; you just have to complete all the connections and roll the surface cleaner over the area. When you don’t know how to use a surface cleaner and have one, you will be unhappy and frustrated. When you buy a pressure washer, the seller is not going to give you a surface cleaner. You have to buy it as an extra component, and you should get one if you are satisfied with its need. A surface cleaner is a pressure washer component with a large handle and ahead at its end containing multiple nozzles. This component is used to make sure a perfect clean to a large area.
After setting up your pressure washer, you need to connect the high-pressure hose with a surface cleaner and move it over a surface that you are going to clean. This magical component reduces human effort, saves time. It provides a perfect cleaning experience that attracts its users.
What do you use a surface cleaner for?
There are times when we often need to clean a large area such as a patio, garage, concrete floor, or ground. Using a regular pressure washer with a general spray gun will take a long time, and it’ll make the surrounding area wet with the water splash. A surface cleaner contains a long handle with a head containing few nozzles that rotate while in use.
If you don’t want to get wet or want to clean your area quickly, you must depend on a surface cleaner. This component uses pretty less water which is very important in present days when the world is suffering from a shortage of water. It’s quite safe, and it doesn’t take much effort to use a surface cleaner.
How to use a pressure washer surface cleaner
As mentioned before, to use a surface cleaner, you don’t have to be a professional, or you don’t have to take any training. Anyone having this component for the first time can comfortably use it to clean an area. You just need to have a basic knowledge of how to start a pressure washer and follow the steps below.
Setup your machine
You have to set up your pressure washer and make it ready to use at the very first step. For that, connect the garden hose with a water faucet and your pressure washer pump.
Then connect one end of the high-pressure hose to the water outlet of the pump and the other end to the surface cleaner. Next, attach the power supply, for electric machine connect the power cord and for gas machine fill its tank with fuel. You are pretty much ready to go now.
Start the engine
Now it’s time to start the engine and check if everything is working the water is out properly. Pull the string to start if you have a gas-powered pressure washer or turn on the switch of electric one to start it. Wait for some time and check if water is being sprayed through its nozzles.
The nozzles should rotate under the cover at this point and to check that lift the head and see. If the nozzles are not rotating, there must be some problem, and you have to check all its connections again.
Move the surface cleaner
At this point, you have to be a little cautious and move the head evenly over a surface. Hold the handle tight so that it doesn’t slip from your hand and put some effort into moving it.
Starting from one side, slowly move it to the other side and check if the area is being cleaned as per your expectation.
To clean the tough dirt, you have to move it even slower and allow the surface cleaner some time to clean them. If you don’t move it evenly, your cleaning will not be even, and you will see shades of dirt remaining on the surface.
Put on PPE
It’s always recommended that you put on appropriate personal protective equipment (PPE) before using a pressure washer. In this case, you should wear proper boots, gloves, goggles, and trousers.
When you use water, there is a chance that you might slip or the handle of a surface cleaner might slip from your hand. You must be careful and keep your children away while using machines.
Can I use a pressure washer surface cleaner on a deck?
Yes, you can surely use a pressure washer surface cleaner on a deck, provided your deck doesn’t have many ups and downs. A surface cleaner provides the best result when the surface is flat; it also becomes more accessible for a user to handle.
For cleaning your deck, you need to start the power washer and connect your surface cleaner with it. Now move the surface cleaner slowly over the area to be cleaned and make sure the water doesn’t get stuck. Next, clean all the corners and following the same method.
How do you pressure wash a driveway with a surface cleaner?
A driveway is made of concrete where dirt and dust get stuck, and it becomes tough to clean them. To clean it using a surface cleaner, first, you have to connect all the components and be ready to clean.
Start from one end and slowly move the surface cleaner head side by side to reach the other end. Move it twice over the same area if you see any dirt remaining.
For cleaning a large area, the best option is to use a surface cleaner. This component will make your cleaning very effective; it’ll be time and energy-saving as well. To get these benefits you should not mind in spending some of your money to buy a surface cleaner. It’s a very useful component, provided you already have a pressure washer.